The kitchen is the one area in the house where you can utilise a variety of tile varieties in a variety of applications, and they will all look great. A glossy wall tile is not at all like a glossy floor tile.The flooring tile must be fine to walk on, and a shiny kitchen floor tile may be hazardous.
Tiles – particularly those of the wall variety – are likely to appear prominently when it comes to renovating a kitchen due to their various aesthetic and functional benefits.They look the part, they work the part (in that they’re easy to maintain once installed), but the process of actually installing them scares a lot of people.
The above two are the reason, we discuss the dos and don’ts guide for kitchen tiling. Let’s get started.
Do’s For Kitchen Tiling:
- Find the position of the tile installation:
Before selecting a material, you must first determine on the surface on which the tile will be placed. Tile can be used as a backsplash behind a stove or to cover the bottom of higher cabinets on the wall.
- Figure out your budget:
Kitchen tile can be inexpensive or expensive (design ceramic tiles).Before you get married to an imagined image in your imagination, do your study! Tile and home improvement businesses can assist you in calculating the amount of product needed for your kitchen.
- Consider your family’s lifestyle:
While kitchen tile is durable, it still requires maintenance, and the lifespan of each material varies. Ceramic tile is a good choice for counters because it is robust, can withstand heat from hot pans, and is easy to clean and maintain. Unfortunately, the surface of a ceramic tile can be uneven and readily broken or chip. Check to see if the tile finish you chose is compatible with your family’s lifestyle.
Don’ts For Kitchen Tiling:
- Failure to Preparing Surface areas:
When starting a tiling job, one of the most common mistakes is neglecting to thoroughly prepare the surface to be tiled on. Surfaces should be level, without dents or flaws, and clear of the trash. Remove any protruding obstructions such as screws, fix any damaged plaster, and, if required, level the surface with a specialised levelling agent before attempting to install tiles.
- Battens Aren’t Necessary:
Avoid battens at all costs if you want your tiles to be set in straight lines both vertically and horizontally. Unlike what your eyes may suggest to you, most floors and walls are not precisely straight. This means that if you start tiling from the floor up (perhaps using the skirting as a starting point), you might end up with uneven rows until you reach the top of the wall. As a result, while tiling walls, we always recommend utilising a wooden batten.
- Using the Improper Adhesive Type:
Choosing the right tile adhesive for your job is critical since if you choose the wrong one, you’ll be in a world of misery when it comes to fixing your mistakes. Although it may seem self-evident, you’d be surprised how many people neglect to use waterproof glue when installing tiles around bathtubs, showers, splashbacks, and in wetrooms! Picking the correct glue for your project may appear to be a minefield, but it’s actually not that tough if you follow a few easy guidelines.
Please don’t make the same mistakes we’ve discussed here if you’re ready to start a wall tiling job – they’re quite simple to avoid, and following our advice will save you. Visit our page for further information on all elements of tiling, including preparation and installation tips. Tiling NSW, a renowned tilers Sydney offers professional tiling and waterproofing services at best price.