How to Install Ceramic Tile

Ceramic tile installation may be difficult. Good planning and a thorough approach are essential for successful tiling projects. Before you begin, take the time to complete the proper amount of preparation work. As the ceramic mosaic tile installation services provider, Tiling NSW knows the best practices. In this article, we discuss the procedure of installing ceramic tiles.


 STEP 1: Evaluate

Begin by checking the area where the ceramic mosaic tile installation will be done. The substrate, or the surface on which the tile is put, is equally as essential as the tile itself. Broken tiles and failing grout might be caused by a bending floor or an uneven wall.

Under tile that is expected to become wet, use a water-resistant backer board rather than drywall (shower walls and bathroom floors, for example). The substrate, whether it’s backer board, plywood, or concrete, must be sound, clean, and dimensionally stable. Surfaces must be level, plumb, and true to the plane, as our professional tilers say—that is, there must be no bumps. Before tiling the walls or floors, remove all wallpaper, loose plaster, flaking paint, peeling tiles, and unsecured sheet flooring.


 STEP 2: Take measurements

 -Wall tiling

When tiling a wall, you’ll want to start with a level topline. Because few walls are perfectly plumb, mark the top line using a level. To make it flush with the floor, set it at a height that prevents you from having to cut extremely thin tiles (or very thin shards from nearly whole tiles). Make a top line and then a center line on your walls. Make sure you’ve laid out all of the walls you wish to tile before you start tiling.

 -Floor tiling

Find the middle of the surface first to make your completed ceramic tile surface seem symmetrical (even if it isn’t). Then take measurements from both sides. If you’re tiling a tiny space, pay extra attention to this step since broad tiles on one edge and thin tiles on the other will make the work seem unbalanced.


 STEP 3: Arrange the tiles.

Lay the tiles out to see how they will look once you’ve established the center point and leveled the area for floor installations (or set the top line level for wall installations). Within each quadrant of the grid, let it dry before mixing the glue or mortar.

The distance between tiles should be consistent. If your tiles aren’t on mesh sheets, use spacers. The greater the tile, the larger the gap between them should be. To eliminate grout lines, some do-it-yourselfers make the error of pressing tiles too close together.

 STEP 4: Using a tile cutter

The first step in cutting tile is to measure the size of the tile you want to cut and then use a tile cutter to cut it a felt-tip marker to imprint the proportions to the glazed surface of the tile. Place the tile on the tile cutter, aligning the cutter’s centerline with the axis that the tile will be cut on. The top of the tile should be flush with the fence at the top of the cutter to maintain it square. Then, using the lever linked to the cutting wheel, drag the cutter across the tile’s surface, using strong, equal pressure. With the cutter, make only one pass. Last but not least, snap the tile.

 STEP 5: Putting the tiles together

If you’re using tile, it’s probably in a location where moisture is a given—the kitchen, the bathroom, the foyer, and so on. Make certain you use a water-resistant adhesive. You may use a mortar or a premixed glue, but if you go with the latter, make sure it’s a thin-set variety.

 STEP 6: Tile grouting

Grout is often bought as a powder that must be combined with water or an additive. Read the packaging instructions or seek help at the tile retailer. Wear gloves and uniformly distribute the grout, being careful to use a blunt stick or another instrument to push it into the joints.

 STEP 7: Clean and seal the area

Make sure the residue on the tiles’ surface is sponged off before it has a chance to dry. This phase will take an hour or more to complete because it will require multiple passes. When working with tiles that have a porous or variegated surface, this is a crucial step. It can be nearly hard to remove dried grout from indentations.


You can apply grouter according to the manufacturer’s suggestions or you can as us. Professional tilers of Tiling NSW know what is best for our clients. For more information regarding the ceramic mosaic tile installation process, contact us now!

7 Tips to Choose the RIght Swimming Pool Tile for your Home

Without floor tiles, a swimming pool would appear dry and lifeless, and floor tiles may help to improve the appearance of this element in your home. You are completely incorrect if you believe that choosing floor tiles for your pool is just based on color, design, and aesthetics.

There are still a number of factors to consider before purchasing one. In this article, we will go through some factors on tiles for swimming pools in Sydney.

So we’ll provide you some recommendations on how to find the best pool tiles. This will not only offer your pool a beautiful aesthetic and a welcome atmosphere, but it will also make it safer to use, especially if there are children around.

Now scroll down and take a look at the guidance we’re about to provide you. Finally, you will have sufficient knowledge to select swimming pool tiles for your home’s most cherished feature.


 1.Create a budget plan.

The type of tiles you may buy for your pool is determined by your budget, since the more complicated the pattern, the more expensive the tiles are.

Setting a budget might also assist you in purchasing anything inside your budget.


 2.Make safety a top priority.

Make sure you select slip-resistant tiles for the area outside the pool. Keep in mind that the poolside will be dripping wet for the majority of the time. As a result, seek tiles that feature non-slip surfaces.


 3.Choose tiles that come with a lifetime warranty.

It would be costly if you had to replace your tiles every time there was a problem. To avoid this situation, pool tiles with a lifetime warranty against breakage and color fading are recommended.

This will give your pool a long-lasting attractiveness while also saving you money.

 4.Select a design.

The aesthetics of your pool are important in order to make it look more appealing. Select a design that complements your pool.

There are ornamental tiles with various prints as well as plain tiles. Make a decision on how you want your pool to appear. To make a visual effect, simply mix basic colored tiles and arrange them aesthetically.

 5.Inside the pool, choose long-lasting tiles.

Inside and outside the pool, the tiles are varied. Slate, pebble, or stone would be the materials used for floor and wall tiles. Just make sure they’re long-lasting and slip-resistant.

 6.Inquire about the cost of maintenance.

Don’t forget to inquire about how to clean the tiles before you get them. Naturally, the tiles would accumulate scum and build-up, necessitating the use of abrasive cleaning.

 7.Request samples.

You may request samples of the tiles before placing your purchase so you can see how they will appear outside. This may also help you come up with new ideas for pool tile designs.


Contact Tiling NSW For Best Pool Tiles Installation:

When it comes to tiling, Tiling NSW recognizes the value of a well-designed, attractive swimming pool. We provide high-quality work across the Northshore with our professional pool tilers in Sydney. We provide pool tiling services in all aspects, and our attention to detail assures that your pool tiler will exceed your expectations and add value to your property.

6 Reasons Tiling Is The Best Home Renovation Idea

Tiles play a major part in interior design, which sets the house’s style and feel.

Tiles are utilized for the ideal atmosphere, but can sometimes be hard to pick. It might be beneficial to consult the tiling services provider as they can advise you to make the right pick.

Here are the reasons why tiling can be the best home renovation idea:

1. Tiles are a simple method to provide a luxurious appearance:

If you want to have an instant wow factor in your house, tiling is a safe and durable means of creating beautiful results. For instance, the hallway is the entrance to your house and although it is frequently ignored, it is crucial to get it properly.

2. Tiles are easy to clean so that you may live easily

It is vital to maintain everything in your home, and fortunately, for years to come tiles remain beautiful. It requires little effort to clean them frequently or to keep them shining whether it is ceramic or porcelain.

3. With amazing patterns, you may make a statement

We want our bathrooms as one of the most private areas of the house, to be an excellent retreat and to be completely practical. In reality, be it seeking a sleek toilet or spa retreat, this is the one room in which you may truly be courageous with your decision and design. Patterns in the bathrooms work beautifully – think of the complex design and bold colors used in the Victorian interior.

4. Extra big tiles may make a sense of space

Bedrooms are our sanctuaries – a haven of relaxation and calm, and where we sleep most of the time. A sleek, uncompromising environment is essential, as the element of luxury it merits in your bedroom.

5. Tiles may be used for various sections of your home with a little ingenuity.

Have you ever thought of sprucing your old furniture with leftover tiles? A mirror may be framed, a table can be tiled to give it a fresh living or even a floral pot can be tiled in the garden. Nor will these suggestions for house renovation cost any more.

6. Only by switching your tile can you modify your appearance.

Grout is the cement that screens the tiles and avoids moisture. If you have tiles, only by altering the color, it is easy to generate alternative appearances. In order to make the look more acute, it is better to adhere to simple tiles, but in no time will a statement floor or wall be made.


Now you know the benefits of tiling in your home, it’s time to contact the best tilling services in Sydney. The Tiling NSW provides a high-quality professional tiling service.

We provide a full tiling service for all applications, with extensive knowledge in all parts of the interior and outdoor tiling operations, from preparation and fixing to cleaning and restoration. For a more complete perspective, please see get in touch with us at Tiling NSW